The International Maritime Organization’s Marine Environment Protection Committee (MEPC) meets for its 85th session in London from 30 November to 3 December 2026. Most of the headlines will be about greenhouse gas rules, but several items on the agenda are much closer to the engine room. Ballast water systems, bilge water handling, engine certification and ship efficiency are all up for decision, and each one affects the pumps, separators and spares that superintendents buy. (Source: IMO meeting preview, via Cyprus Shipping News.)
What is on the table
- Ballast water. MEPC is expected to adopt a revised Annex to the Ballast Water Management Convention, following a review of how the treaty has worked in practice. It is also expected to approve amendments to the code used to approve ballast water management systems.
- Bilge water. A new MARPOL Annex I regulation is expected to be adopted for oily bilge water holding tanks and service tanks on ships fitted with an integrated bilge water treatment system, with related changes to the IOPP Certificate and the Oil Record Book.
- Engine certification. Amendments to the NOx Technical Code cover how engines are certified when they run on fuels that contain no carbon, or blends of such fuels with conventional fuels.
- Energy efficiency. The Committee continues its review of the Carbon Intensity Indicator (CII), including proposals for an enhanced Ship Energy Efficiency Management Plan (SEEMP).
- Greenhouse gases. Talks continue on the IMO’s proposed mid-term measures, after an intersessional working group meeting from 23 to 27 November.
Amendments adopted at MEPC normally take effect some time after adoption, often more than a year later, so owners have time to plan. The exact dates will be confirmed in the final decisions.
What it means for machinery and spares
Ballast water systems need working pumps. A ballast water treatment system is only as reliable as the pumps, valves, filters and sensors around it. Tighter rules and more port state attention make breakdowns costlier. Owners should check ballast and treatment system pumps and keep critical spares on board.
Bilge systems get a closer look. New rules on bilge water tanks and record keeping mean surveyors will look harder at the whole bilge system: bilge pumps, oily water separators, oil content monitors and alarms. A faulty bilge alarm or a worn separator pump can hold a ship in port.
Efficiency still pays. With the CII review continuing, every worn pump, fouled cooler and leaking compressor that adds to generator load also adds to a ship’s carbon intensity. Routine overhauls with the right spares remain the cheapest way to improve a rating.
Practical steps before the new rules arrive
- Review the condition of ballast, bilge and oily water separator pumps at the next survey or dry dock.
- Check that oil content monitors and bilge alarms are calibrated and that spare parts are on board.
- Plan overhauls of pumps and coolers that run continuously, since they have the biggest effect on fuel use.
How AMAF Marine can help
AMAF Marine supplies marine pumps and spares, including bilge pumps, ballast water treatment system pumps and bilge alarm monitors. We offer used and reconditioned original maker equipment, as well as new spares (OEM and quality equivalents), tested before dispatch and shipped from our warehouse to any port.
Send us your nameplate photo or part numbers and we will quote within 48 hours.



