Fuel and lube oil separators, often called purifiers, protect the most expensive machinery on board. They spin water, sludge and catalytic fines out of heavy fuel oil, marine gas oil and lube oil before it reaches the engines. When a separator stops, the ship has to run on its standby unit, and if that fails too, engine damage follows quickly. Getting the right spares, and getting them fast, is a big part of keeping a separator reliable.
The spares that wear first
- Seal rings and O-rings for the bowl, sliding bowl bottom and operating water system. These are replaced at every major service.
- Disc stack and top disc, which can be damaged by corrosion, erosion or poor cleaning.
- Bowl parts: bowl body, bowl hood, lock ring, distributor and paring disc or gravity disc.
- Vertical and horizontal shaft bearings, spindle parts and friction pads or couplings.
- Operating water and sludge discharge parts: nozzles, valve plugs, solenoid valves and the operating slide.
- Control unit parts, such as sensors, transmitters and the controller itself on automatic systems.
Most owners keep an intermediate service kit and a major service kit on board for each separator model, as the maker recommends.
Used, reconditioned or new: which to choose
Used separators and major parts, such as bowl assemblies, disc stacks and frame parts, are original maker items removed from a vessel and inspected. They are a fast, cost-effective way to replace a damaged bowl or to get a complete standby unit.
Reconditioned separators are stripped, cleaned and rebuilt with new bearings, seals and wear parts, then test run before dispatch. They are a good choice when a unit has to be replaced quickly and a new one is too expensive or has a long lead time.
New spares, OEM or quality equivalents, are the right choice for service kits, seals, bearings and other wear parts.
One important point: bowl parts are balanced as a set. A used or reconditioned bowl should come as a complete, balanced assembly, not as mixed parts.
Common makers and models
Alfa Laval separators such as the MOPX, MMPX, MAPX, MFPX and S-type and P-type units are the most common on merchant ships, followed by GEA Westfalia, Mitsubishi SJ series and others. Older Alfa Laval models are still very common on ships in service, and parts for them are often easiest to find as used and reconditioned items.
What to send your supplier
- A photo of the separator nameplate with model, serial number and bowl type
- Part numbers from the maker’s spare parts list, or the service kit you need
- Whether it is a fuel oil, lube oil or bilge separator
- Quantity, vessel name or IMO number and the delivery port
How AMAF Marine can help
AMAF Marine supplies marine separators and separator spares, including Alfa Laval models such as the MMPX 404 and MFPX 307, and EPC 400 control units. Browse more in our separator spares category. We offer used and reconditioned original maker equipment, as well as new spares (OEM and quality equivalents). Separators are tested before dispatch and ship from our warehouse to any port.
Send us your nameplate photo and we will quote within 48 hours.



